1.What isthe tenacity of silk fiber…
2.Why silk absorbs relatively loweramount of acid and alkali as compared to wool…
3.How could the product life cycle of a textile item be extended?
4.Which of the following decorative techniques would most successfully achieve fabric layering on jeans?
5.What do mean by bourette silk?
6.Which yarn run along the length of loom?
7. Which device carry the weft yarn for filling acrossthe loom?
8.What is the moisture content of wool?
9.Which of the following Wool fibre can be obtained ?
10.How to improve the fabric cover ona loom..
11.Which type of fabric is made up on Water jet loom?
12.Which process gives a temporary protective coting against damage of fabric?
13. How could the product life cycle of atextile item be extended?
14.)How many sets of yarn are required for weaving?
15.Which following property is not affected by sizing ?
16.Why sizing is important during weaving?
17.How to improve beam warping process?
18.Which type of process is used for silk and synthetic yarn ?
19.Which type of creel is used for Large lots of similar Yarn want to be processed in warping process
20.What is a full form of EPI?
21. Which fibre that contains nitrogen and sulphure?
22.What is the moisture regain of wool
23.) Which defect caused due to Damageor defective reed ?
24.Which defect cause due to wrong drawing of thread ?
26.Which defect Caused by a number of ruptured wrap ends that have been repaired ?
27.Which defect causes Results from absent reed wire causing wrap end stone held apart, exposing the filling yarn. Will be conspicuous on fabrics that use different ?
28.Which defect caused Bad needle, take down mechanism too tight, high tension on yarn, bad yarn needle tootightin their slots, dial height too lowor too high, badly tied knots, improper stitch setting ?
29.What is the other name of warp yarn?
30.Which defect show Visible line warp way in the cloth?
